| Blown Film |
| Thermoforming |
| Blow Molding |
| Fiber |
| Injection Molding |
| Extrusion Coating |
| Environmental Solutions |
Higher line speeds, increased outputs, better adhesion, ease of conversion, improved COF, printability, and better barrier are among the many performance improvements that are possible with the addition of PolyCal™ into any polyolefin extrusion coating process.
SDS and TDS documents are available for all the products listed below.
Please visit our Document Request Form to request this information.
 |
 |
PolyCal™ EC |
76% of a 1 micron CaCO3 in LLDPE |
Optimized calcium carbonate in a LDPE extrusion coating carrier. |
|
|
Minacoat™ E1 |
CaCO3 in LDPE for Extrusion Coating |
Formulated with a specialty calcium carbonate in a low density PE carrier. |
|
|
Minacoat™ E3 |
HMW-HDPE Based CaCO3 Concentrate |
Pelletized concentrate based on a high-molecular weight high-density polyethylene carrier resin. |
Heritage Plastics product information can also be obtained by contacting a Heritage Plastics sales representative, customer service, or technical support.
1002 Hunt Street / Picayune, MS 39466 USA / Toll Free: 1.800.245.4623 / Tel: 1.601.798.8663 / Fax: 1.601.798.1946
Terms and Conditions
Copyright © Heritage Plastics, Inc.
HM10® is a registered trademark of Heritage Plastics, Inc. PolyCal™, HiCal™, PolyMax™ are trademarks of Heritage Plastics, Inc.
Web published by Marketing Options LLC..
